LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2017 >> MDX Base >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driving Assistance Warning Systems - Testing & Troubleshooting (Except Hybrid) >> Symptom Troubleshooting >> Lane Departure Warning (LDW) Symptom Troubleshooting - LDW indicator does not go off (FCW indicator is ok)

Lane Departure Warning (LDW) Symptom Troubleshooting - LDW indicator does not go off (FCW indicator is ok)

  1. DTC check

    -1. Turn the vehicle to the ON mode.

    - 2. Check for DTCs with the HDS.

    DTC Description DTC
       

    DTC (FCW/LDW)

    Are any DTCs indicated?

    YES 

    Go to the indicated DTC troubleshooting.

    NO 

    Go to step 2.

  2. Problem verification

    -1. Turn the vehicle to the OFF (LOCK) mode, then wait for at least 10 seconds.

    - 2. Turn the vehicle to the ON mode.

    - 3. Check the LDW indicator.

    Does the LDW indicator come on for about 6 seconds, then go off?

    YES 

    Intermittent failure, the system is OK.

    NO 

    Go to the gauge control module self-diagnostic function - Refer to: Gauges Self-Diagnostic Function (2017 2018 2019 2020), or Gauges Self-Diagnostic Function (2014 2015), or Gauges Self-Diagnostic Function (2016) .