LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2017 >> MDX Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Can Gateway - Diagnostics (Except Hybrid) >> DTC Troubleshooting >> DTC U3000-49

DTC U3000-49

DTC U3000-49  : CAN Gateway Internal Failure

NOTE:  Before you troubleshoot, review the general troubleshooting information - Refer to:

How to Troubleshoot the Fuel and Emissions Systems (2014-20) or

How to Troubleshoot the Fuel and Emissions Systems (With Auto Idle Stop System) (2016-20)

DTC Description DTC
U3000-49 CAN Gateway Internal Failure  

DTC (CAN gateway)

  1. Problem verification

    - 1. Turn the vehicle to the ON mode.

    - 2. Clear the DTC with the HDS.

    - 3. Turn the vehicle to the OFF (LOCK) mode.

    - 4. Turn the vehicle to the ON mode.

    - 5. Check for DTCs with the HDS.

    DTC Description DTC
    U3000-49 CAN Gateway Internal Failure  

    Is DTC U3000-49 indicated?

    YES 

    Replace the CAN gateway .

    NO 

    Intermittent failure, the system is OK at this time.