LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2014 >> TSX Special Edition, Automatic Trans >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension (4-CYL) >> Damper/Spring Disassembly, Inspection, and Reassembly >> Disassembly

Damper/Spring Disassembly, Inspection, and Reassembly: Disassembly

  1. Compress the damper spring, then remove the self-locking nut (A) while holding the damper shaft. with a hex wrench (B). Do not compress the damper spring more than necessary to remove the self-locking nut.
    Fig 1: Identifying Self-Locking Nut (A) And Hex Wrench (B)
    G07769265Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Release the pressure from the strut spring compressor, then disassemble the damper as shown in the Exploded View.
scientia non olet · About LEMON Manuals