LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2014 >> TSX Special Edition, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 88 (Manual Transmission (4-CYL)) >> Differential Carrier/Final Driven Gear Replacement

Differential Carrier/Final Driven Gear Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Loosen the bolts in a crisscross pattern in several steps, then remove the, bolts and the final driven gear (A) from the differential carrier (B).
    NOTE: The bolts have left-hand threads.
    Fig 1: Final Driven Gear (A) Differential Carrier (B) With Torque Specifications
    G07768327Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install the final driven gear with the chamfer on the inside diameter facing the carrier. Tighten the bolts in a crisscross pattern in several steps.
    NOTE: The bolts have left-hand threads.
scientia non olet · About LEMON Manuals