LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2014 >> TSX Special Edition, Automatic Trans >> Repair and Diagnosis >> Electrical >> Gauges >> Dashboard (4-CYL) >> Speaker Cover Removal/Installation

Speaker Cover Removal/Installation

NOTE:
  • Take care not to scratch the dashboard or the related parts.
  • When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
  1. Remove the speaker cover (A).
    • 1. Apply the protective tape (B) to the dashboard beside the side edge of the speaker cover.
    • 2. Pry up on the edge of the cover to detach the clips with a flat-tip screwdriver.
    Fig 1: Removing Speaker Cover
    G07769908Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install the cover in the reverse order of removal, and note these items:
    • If the clips are damaged, replace them with new ones.
    • Push the clips into place securely.
scientia non olet · About LEMON Manuals