LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2014 >> TSX Special Edition, Automatic Trans >> Repair and Diagnosis >> Electrical >> Gauges >> Dashboard (4-CYL) >> Center Pocket Removal/Installation

Center Pocket Removal/Installation

NOTE:
  • Take care not to scratch the dashboard or the related parts.
  • A/T is shown; M/T is similar.
  1. Remove these items:
  2. M/T: Move the shift lever to R position.
  3. A/T: Move the shift lever to 1st.
  4. Remove the bolts securing the center pocket (A). Pull out the center pocket, and disconnect the center pocket light connector (B), then remove the center pocket.
    NOTE: Take care not to scratch the shift lever knob and the A/T gear position indicator panel (A/T).
    Fig 1: Center Pocket, Center Pocket Light Connector And Bolts With Torque Specification
    G07769903Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the pocket in the reverse order of removal.
scientia non olet · About LEMON Manuals