Power Mirror Replacement
NOTE:
Take care not to scratch the door.
- Lower the door glass fully.
- Remove the tweeter cover (A).
- 1. With your hand, carefully pull out the top edge of the tweeter cover to detach the hooks (B) and the clips.
- 2. Disconnect the tweeter connector (C).
- Remove the door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
- Disconnect the power mirror connector (A).
- While holding the mirror (B), remove the nuts securing the mirror.
- Release the catch (A) from the hole in the door, then remove the mirror (B).
- Install the mirror in the reverse order of removal, and note these items:
- Make sure each connector is plugged in properly.
- Replace any damaged clips with new ones.
- Push the clips and the hooks into place securely.