LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2014 >> TSX Special Edition, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumpers (4-CYL) >> Rear Bumper Reflector Replacement

Rear Bumper Reflector Replacement

NOTE:
  • Put on gloves to protect your hands.
  • Take care not to scratch the rear bumper or the body.
  1. Push out the clip (A), and release the hook (B), then remove the rear bumper reflector (C) from the rear bumper (D).

    Sedan 

    Fig 1: Identifying Rear Bumper Reflector, Rear Bumper, Clip And Hook (Sedan)
    G07770131Courtesy of AMERICAN HONDA MOTOR CO., INC.

    Sport Wagon 

    Fig 2: Identifying Rear Bumper Reflector, Rear Bumper, Clip And Hook (Sport Wagon)
    G07770132Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Reattach the hook to the rear bumper first, and push the clip and the hook into place securely.
scientia non olet · About LEMON Manuals