Rear Gutter Trim Replacement

Special Tools Required

KTC Trim Tool Set SOJATP2014*

*Available through the Acura Tool and Equipment Program; call 888-424-6857

NOTE:

Take care not to scratch the body.
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

Remove the rear gutter trim (A).
- 1. Pry up the notch (B), and detach the clip.
- 2. Pull out the upper area of the trim.
- 3. Pull up the trim to release the hooks (C).
Fig 1: Pulling Out Upper Area Of Trim
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the trim in the reverse order of removal, and note these items:
- If the clip is damaged or stress-whitened, replace it with a new one.
- Push the clip and the hooks into place securely.