Emblem/Sticker Replacement - Sport Wagon

1. To remove the front "A" emblem, remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION - SPORT WAGON ).
2. Clean the body surface with a shop towel dampened with isopropyl alcohol. After cleaning, keep oil, grease, and water from getting on the surface.
3. Apply the emblems where shown. Front

Front 

Fig 1: Identifying Emblem/Sticker Replacement Position (Front)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Rear 

Fig 2: Identifying Emblem/Sticker Replacement Position (Rear)

Courtesy of AMERICAN HONDA MOTOR CO., INC.