Dashboard Center Vent Removal/Installation

Special Tools Required

KTC Trim Tool Set SOJATP2014*

*Available through the Acura Tool and Equipment Program; call 888-424-6857

NOTE:

Take care not to scratch the dashboard or the related parts.
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
The left dashboard center vent is shown; the right dashboard center vent is similar.

Remove these items:
- Without navigation: Audio unit (see AUDIO UNIT REMOVAL/INSTALLATION )
- With navigation: Audio/navigation switch panel (see AUDIO-NAVIGATION SWITCH PANEL REMOVAL/INSTALLATION )
Remove the screws, then remove the dashboard center vent (A) from the center panel (B) while releasing upper tabs (C) with the appropriate trim tool.

Fig 1: Identifying Dashboard Center Vent, Center Panel And Upper Tabs With Screws
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the vent in the reverse order of removal, and push the tabs into place securely.