LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2014 >> TSX Special Edition, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Exterior Lights (4-CYL) >> High Mount Brake Light Replacement >> Sedan

High Mount Brake Light Replacement: Sedan

  1. Open the trunk lid.
  2. Disconnect the 2P connector (A) from the high mount brake light.

    High Mount Brake Light: 21 W 

    Fig 1: Identifying 2P Connector (A), Bulb Socket (B) And Bulb (C) (Sedan)
    G07770520Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Turn the bulb socket (B) 45° counterclockwise to remove the bulb (C).
  4. To replace the high mount brake light housing, remove the rear shelf (see REAR SHELF ).
  5. Remove the high mount brake light (A).
    Fig 2: Identifying High Mount Brake Light (A)
    G07770521Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Install the light in the reverse order of removal.
scientia non olet · About LEMON Manuals