Transfer Cover Oil Seal Replacement

Special Tools Required 

• Driver Handle, 15 x 135L 07749-0010000
• Oil Seal Driver Attachment, 65 mm 07JAD-SH30100

1. Remove the oil seal (A) from the transfer cover (B).
   Fig 1: Removing Oil Seal From Transfer Cover

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Install a new oil seal (A) in the transfer cover (B) to a height (C) of 0- 1 mm (0- 0.04 in) above the transfer cover surface using the driver handle (D) and the 65 mm oil seal driver attachment (E).
   Fig 2: Installing Oil Seal In Transfer Cover To Height Above Transfer Cover Surface Using Driver Handle And Oil Seal Driver Attachment

   Courtesy of AMERICAN HONDA MOTOR CO., INC.