Oil Seal Replacement

Special Tools Required 

• Driver Handle, 15 x 135L 07749-0010000
• Oil Seal Driver Attachment 07NAD-P20A100

1. Remove the oil seal (A) from the transmission housing (B).
   NOTE: Be careful not to damage the transmission housing while removing the oil seal.
   Fig 1: Removing Oil Seal From Transmission Housing

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Remove the oil seal (A) from the clutch housing (B).
   NOTE: Be careful not to damage the clutch housing while removing the oil seal.
   Fig 2: Removing Oil Seal From Clutch Housing

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Install a new oil seal flush with the transmission housing using the 15 x 135L driver handle (A) and the oil seal driver attachment (B).
   Fig 3: Installing Oil Seal Flush With Transmission Housing Using Driver Handle And Oil Seal Driver Attachment

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
4. Install a new oil seal flush with clutch housing using the 15 x 135L driver handle (A) and the oil seal driver attachment (B).
   Fig 4: Installing Oil Seal Flush With Clutch Housing Using Driver Handle And Oil Seal Driver Attachment

   Courtesy of AMERICAN HONDA MOTOR CO., INC.

Special Tools Required 

• Driver Handle, 15 x 135L 07749-0010000
• Oil Seal Driver Attachment, 65 mm 07JAD-SH30100

1. Remove the oil seal from the clutch housing.
   Fig 1: Removing Oil Seal From Clutch Housing

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Install a new oil seal flush with the clutch housing using the driver handle (A) and the 65 mm oil seal driver attachment (B).
   Fig 2: Installing Oil Seal Flush With Clutch Housing Using Driver Handle And Oil Seal Driver Attachment

   Courtesy of AMERICAN HONDA MOTOR CO., INC.