GPS Antenna Removal/Installation

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the dashboard and related parts.
Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage.

Remove the navigation display unit .
Remove the dashboard center trim (see DASHBOARD CENTER TRIM REMOVAL/INSTALLATION ).
Pull out the audio-navigation unit (see step 4, and disconnect audio-navigation unit connector J (2P) (A).

Fig 1: Identifying GPS Antenna And Audio-Navigation Unit Connector J (2P)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the screws and detach the clip, then remove the GPS antenna (B).
Install the GPS antenna in the reverse order of removal.