VSA DTC 31-11, 32-11, 33-11, 34-11, 35-11, 36-11, 37-11, 38-11
DTC 31-11 : ABS Solenoid Valve Malfunction
DTC 32-11 : ABS Solenoid Valve Malfunction
DTC 33-11 : ABS Solenoid Valve Malfunction
DTC 34-11 : ABS Solenoid Valve Malfunction
DTC 35-11 : ABS Solenoid Valve Malfunction
DTC 36-11 : ABS Solenoid Valve Malfunction
DTC 37-11 : ABS Solenoid Valve Malfunction
DTC 38-11 : ABS Solenoid Valve Malfunction
NOTE: Before you troubleshoot, review the how to troubleshoot the VSA system - Refer to:
How to Troubleshoot the VSA System (2014 2015 2016) or
How to Troubleshoot the VSA System (2017 2018 2019 2020) .
| DTC Description | DTC | Freeze Frame |
|---|---|---|
| 31-11 ABS Solenoid Valve Malfunction | ||
| 32-11 ABS Solenoid Valve Malfunction | ||
| 33-11 ABS Solenoid Valve Malfunction | ||
| 34-11 ABS Solenoid Valve Malfunction | ||
| 35-11 ABS Solenoid Valve Malfunction | ||
| 36-11 ABS Solenoid Valve Malfunction | ||
| 37-11 ABS Solenoid Valve Malfunction | ||
| 38-11 ABS Solenoid Valve Malfunction |
DTCs (VSA)
- Problem verification
- 1. Turn the vehicle to the ON mode.
- 2. Clear the DTC with the HDS.
- 3. Turn the vehicle to the OFF (LOCK) mode, then to the ON mode.
- 4. Check for DTCs with the HDS.
DTC Description DTC Freeze Frame 31-11 ABS Solenoid Valve Malfunction 32-11 ABS Solenoid Valve Malfunction 33-11 ABS Solenoid Valve Malfunction 34-11 ABS Solenoid Valve Malfunction 35-11 ABS Solenoid Valve Malfunction 36-11 ABS Solenoid Valve Malfunction 37-11 ABS Solenoid Valve Malfunction 38-11 ABS Solenoid Valve Malfunction Is DTC 31-11, 32-11, 33-11, 34-11, 35-11, 36-11, 37-11, or 38-11 indicated?
YES
The failure is duplicated. Go to step 2.
NO
Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting - Refer to:
How to Troubleshoot the VSA System (2014 2015 2016) or
How to Troubleshoot the VSA System (2017 2018 2019 2020) .
If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the Freeze data/on-board snapshot.
- VSA modulator-control unit check (update)
- 1. Update the VSA modulator-control unit if it does not have the latest software.
- 2. Turn the vehicle to the OFF (LOCK) mode, then to the ON mode.
- 3. Check for DTCs with the HDS.
DTC Description DTC Freeze Frame Is DTC 31-11, 32-11, 33-11, 34-11, 35-11, 36-11, 37-11, or 38-11 indicated?
YES
Check for loose terminals in the VSA modulator-control unit 38P connector. If the VSA modulator-control unit was updated and the symptom/indication is still present, replace the VSA modulator-control unit .
NO
Troubleshooting is complete. If any other DTCs are indicated, go to the indicated DTCs troubleshooting.