DTC B0050-F0
DTC B0050-F0 : Driver's Seat Belt Buckle Switch Malfunction
NOTE:
- Before you troubleshoot, review the general troubleshooting information - Refer to:
- VSA will set this DTC if any SRS DTCs exist.
| DTC Description | DTC | Freeze Frame |
|---|---|---|
| B0050-F0 Driver's Seat Belt Buckle Switch Malfunction |
DTC (VSA)
- Problem verification
- 1. Turn the vehicle to the ON mode.
- 2. Clear the DTC with the HDS.
- 3. Turn the vehicle to the OFF (LOCK) mode.
- 4. Turn the vehicle to the ON mode, then wait for a few seconds or more.
- 5. Check for DTCs with the HDS.
DTC Description DTC Freeze Frame B0050-F0 Driver's Seat Belt Buckle Switch Malfunction Is DTC B0050-F0 indicated?
YES
The failure is duplicated. Go to SRS troubleshooting .
NO
Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting - Refer to:
How to Troubleshoot the VSA System (2014 2015 2016) or
How to Troubleshoot the VSA System (2017 2018 2019 2020) .
If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.