LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2014 >> MDX Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mount System - Troubleshooting (Except Hybrid) >> Connector View >> Engine Mount Control Unit Connector for Inputs and Outputs

Engine Mount Control Unit Connector for Inputs and Outputs

'16Engine Mount Control Unit 16P Connector 

GHH320607Courtesy of HONDA, U.S.A., INC.

'17-20Engine Mount Control Unit 16P Connector 

GHH320608Courtesy of HONDA, U.S.A., INC.
Cavity Terminal Name Connects to
1 ACM SOL R- Rear engine mount actuator
2 ACM SOL R+ Rear engine mount actuator
3 ACM SOL F+ Front engine mount actuator
4 PGND Body ground to G301
5 ACM SOL F- Front engine mount actuator
6 IG SOL Active control engine mount (ACM) control relay
7 TDC OUT PCM (TDC OUT)
8 Not used  
9 *4 IG1 ECU AS No.E20 (7.5 A) fuse in the passenger's under-dash fuse/relay box
9 *5 IG1 VSA(DC/DC) No.H4 (7.5 A) fuse in the auxiliary under-dash fuse/relay box
10 Not used  
11 Not used  
12 CRK OUT PCM (CRK OUT)
13 *6 F-CAN A_H PCM (F-CAN A_H)
13 *7 F-CAN B_H PCM (F-CAN B_H)
14 Not used  
15 *6 F-CAN A_L PCM (F-CAN A_L)
15 *7 F-CAN B_L PCM (F-CAN B_L)
16 SOL RLY Active control engine mount (ACM) control relay

*4: Without auto idle stop system

*5: With auto idle stop system

*6: Without CAN gateway

*7: With CAN gateway