Blind Spot Information System (BSI) Indicator

When the BSI system is OK, the BSI indicator (A) comes on for about 2 seconds after pressing the engine start/stop button to select the ON mode, then it goes off.

When the BSI system detects a problem while in operation, the BSI system stops control. The BSI indicator comes on, and the BSI system indicates "CHECK BLIND SPOT SYSTEM" in the multi-information display (MID) (B).

Fig 1: Identifying BSI Indicator And Multi-Information Display

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Screen Display - Check Blind Spot System

Courtesy of AMERICAN HONDA MOTOR CO., INC.