LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2012 >> ZDX >> Repair and Diagnosis >> Electrical >> Gauges >> Blind Spot Information System (BSI) >> BSI Alert Indicator Removal/Installation

BSI Alert Indicator Removal/Installation

  1. Remove the door mirror cover (see step 2 under ).POWER MIRROR REPLACEMENT
  2. Detach the harness clip (A), and remove the screws and the BSI alert indicator (B).
    Fig 1: Identifying Harness Clip And BSI Alert Indicator With Screws
    G08078344Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the BSI alert indicator in the reverse order of removal.
scientia non olet · About LEMON Manuals