BSI OFF Switch (Built-in to the multi switch)
Pressing and holding the button on the BSI OFF switch (A) for at least 0.5 second turns the BSI system on or off.
To turn on the BSI system, press the engine start/stop button to select the ON mode, then press the BSI OFF button. The BSI indicator in the gauge control module goes off, and the BSI system indicates that it is turned on in the multi-information display (MID).
To turn off the BSI system, press the button on the BSI OFF switch again. The BSI indicator in the gauge control module comes on, and the BSI system indicates that it is turned off in the MID.