LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2012 >> ZDX V6-3.7L >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> Cylinder Block Assembly >> Crankshaft Main Bearing >> Tightening Specifications

Tightening Specifications




Crankshaft Main Bearing Bolts





Tighten the main bearing cap bolts, then tighten the main bearing cap side bolts to the specified torque in the sequence as shown. Repeat the torque sequence again to ensure the bolts are properly torqued.



scientia non olet · About LEMON Manuals