LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2012 >> TL SH-AWD, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission) >> Reverse Idler Gear Removal/Installation

Reverse Idler Gear Removal/Installation

WARNING: This page is about a different variant/trim than selected.
  1. Remove the reverse idler gear assembly (A) from the transmission housing.
    Fig 1: Reverse Idler Gear Assembly With Tightening Sequence & With Torque Specifications
    G08066712Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install the reverse idler gear assembly in the transmission housing. Tighten the bolts in the numbered sequence shown.
scientia non olet · About LEMON Manuals