Lower Front Bumper Grille Replacement

Special Tools Required

KTC Trim Tool Set SOJATP2014*

*Available through the Acura Tool and Equipment Program; call 888-424-6857

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the front bumper.
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

Remove the FRONT BUMPER .
For some models: Remove the headlight washer tube as needed (see HEADLIGHT WASHER (WITH HEADLIGHT WASHER) ).
Remove the screws from back of the front bumper (A), and release the hooks (B, C), then remove the lower front bumper grille (D) and the fog light housing (E).

Fig 1: Identifying Front Bumper, Hooks Lower Front Bumper Grille And Fog Light Housing
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If necessary, release the hooks (F) (four places), then remove the front bumper lower mesh cross bar (G).
Install the grille in the reverse order of removal, and push the hooks into place securely.