The BSI buzzer does not sound
NOTE:
- If the system malfunctions, always check for DTCs with the HDS.
- If a DTC is stored, troubleshoot the DTC first.
- Check for DTCs with the HDS (see General Troubleshooting Information
).
Are any DTCs indicated?
YES -Troubleshoot the indicated DTC(s).
NO -Go to step 2
- Do the gauge control module self-diagnostic function (see
SELF-DIAGNOSTIC FUNCTION
).
Does the side beeper sound?
YES -Replace the BSI control unit
NO -Replace the gauge control module, and recheck.