Canada models

Remove the driver's outer dashboard trim (see DRIVER'S OUTER DASHBOARD TRIM REMOVAL/INSTALLATION ).
Remove the VSA/BSI OFF switch (A).

Fig 1: Identifying VSA/BSI OFF Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each VSA/BSI OFF switch position according to the table.

Fig 2: Identifying Terminals And VSA/BSI Off Switch Position In Table
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 3: Identifying VSA/BSI Off Switch 13P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the continuity is not as specified, install a new switch in the reverse order of removal.