Blind Spot Information System (BSI) Control Unit Inputs and Outputs
| Terminal number | Wire color | Terminal name | Description | Signal |
|---|---|---|---|---|
| 2 | BRN | BSI-CAN L | Radar CAN communication (low) circuit | --- |
| 3 | YEL | BSI-CAN H | Radar CAN communication (high) circuit | --- |
| 4 | GRN | L BSI IND+ | Drives the left BSI alert indicator | --- |
| 5 | LT GRN | B-CAN | B-CAN communication circuit | --- |
| 7 | BLK | GND | Ground circuit for the BSI system | Less than 0.2 Vat all times |
| 8 | ORN | BSI OFF SW | Detects the BSI off switch (USA models) | -- |
| Detects the VSA/BSI off switch (Canada models) | ||||
| 10 | YEL | + B TECH (10 A) | Detects the ignition signal | Ignition switch ON (II): battery voltage Ignition switch OFF: about 0 V |
| 14 | BLU | R BSI IND+ | Drives the right BSI alert indicator | --- |