USA models

Remove the driver's outer dashboard trim (see DRIVER'S OUTER DASHBOARD TRIM REMOVAL/INSTALLATION ).
Remove the BSI OFF switch (A).

Fig 1: Identifying BSI OFF Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each BSI OFF switch position according to the table.

Fig 2: Identifying Terminals And BSI OFF Switch Position In Table
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 3: Identifying BSI OFF Switch 6P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the continuity is not as specified, install a new switch in the reverse order of removal.