A-Pillar Corner Trim Replacement

Special Tools Required

KTC Trim Tool Set SOJATP2014*

*Available through the Acura Tool and Equipment Program; call 888-424-6857

NOTE:

Take care not to scratch the trim or the body.
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

Open the front door.
Carefully insert a trim tool next to the upper clip, then detach the clip by prying on the A-pillar comer trim (A).

Fig 1: Identifying A-Pillar Comer Trim
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Detach the remaining lower clips with a trim tool, then remove the A-pillar corner trim (A).

Fig 2: Identifying A-pillar Corner Trim
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the trim in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.