GPS Antenna Removal/Installation

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the dashboard and related parts.
Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage.

Remove these items:
- Audio-navigation and HVAC switch panel (see AUDIO-NAVIGATION AND HVAC SWITCH PANEL REMOVAL/INSTALLATION )
- Navigation display unit (see NAVIGATION DISPLAY UNIT REMOVAL/INSTALLATION )
- Audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION )
Disconnect audio-navigation unit connector J (A).

Fig 1: Identifying Audio-Navigation Unit Connector J And GPS Antenna
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the self-tapping screws and detach the clips, then remove the GPS antenna (B).
Install the GPS antenna in the reverse order of removal.