LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2011 >> ZDX >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Dashboard >> Dashboard Vent Removal/Installation >> Passenger's Side Vent

Passenger's Side Vent

NOTE: Take care not to scratch the dashboard.
  1. Remove the passenger's dashboard trim panel (see PASSENGER'S DASHBOARD TRIM PANEL REMOVAL/INSTALLATION  ).
  2. Remove the screw, and pry up the bottom edge of the side vent (A) to detach the clips, then remove the side vent.
    Fig 1: Identifying Side Vent Clips And Screw
    G08073931Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the side vent in the reverse order of removal, and note these items:
    • If the clips are damaged or stress-whitened, replace them with new ones.
    • Push the clips into place securely.
scientia non olet · About LEMON Manuals