Driver's Side Vent

NOTE:

Take care not to scratch the dashboard or the related parts.
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

Remove the driver's outer dashboard trim (see DRIVER'S OUTER DASHBOARD TRIM REMOVAL/INSTALLATION ).
Pry up the bottom edge of the side vent (A) to detach the clips, then remove the side vent.

Fig 1: Identifying Side Vent And Clips
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the side vent in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clip into place securely.