Cylinder Head Cover Removal

Cylinder Head Cover Removal

Front

1. Remove the intake manifold.

2. Remove the three ignition coils from the front cylinder head Service and Repair.

3. Remove the harness holder mounting bolt (A) and the harness clamp (B), then remove the harness holder (C) from the bracket.





4. Remove the dipstick (D).

5. Remove the front cylinder head cover.






Rear

1. Remove the intake manifold.

2. Remove the three ignition coils from the rear cylinder head Service and Repair.

3. Remove the power steering hose clamp mounting bolt (A), the harness holder mounting bolts (B), the harness clamp (C), and the breather hose (D).





4. Remove the wire harness (E) from the rear upper cover.

5. Remove the rear cylinder head cover.