33-3

SH AWD DTC Troubleshooting: 33-1, 33-2, 33-3

DTC 33-1, 33-2, 33-3:

Yaw Rate Sensor Malfunction

NOTE: Before you troubleshoot, review the general troubleshooting information Initial Inspection and Diagnostic Overview.

1. Turn the ignition switch to ON (II).

2. Check for DTCs in the VSA system with the HDS.

Are any yaw rate indicator sensor DTCs indicated?

YES -

Go to the indicated DTC's troubleshooting.�

NO -

Go to step 3.

3. Park the vehicle on a level surface.

4. Compare the VOLTAGE OF YAW RATE SENSOR and YAW RATE SENSOR NEUTRAL POSITION DATA in the DATA LIST with the HDS.

Is the difference between the two within 0.1 V?

YES -

Replace the yaw rate-acceleration sensor Service and Repair.�

NO -

Do the yaw rate-acceleration neutral position memorization Testing and Inspection.�