Manufacturer Code Charts: 2609

Navigation System DTC Troubleshooting: 2609

DTC 2609:

VRAM Diag

NOTE:

- Check the vehicle battery condition first Testing and Inspection.
- Before you troubleshoot, make sure to follow the general troubleshooting information How to Troubleshoot the Navigation System.

1. Clear the hard error code.

2. Turn the ignition switch to LOCK (0), and then back to ON (II).

3. Go into the System Diagnostic Mode, and select the Self-Diagnosis Mode.

4. Select the System Links, then select the ECU Info.

Is V-RAM OK indicated?

YES -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the navigation unit Service and Repair.�

NO -

Replace the navigation unit Service and Repair.�