LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2011 >> RDX AWD L4-2.3L Turbo >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Body and Frame >> Seat Temperature Switch >> Service and Repair

Seat Temperature Switch: Service and Repair




Seat Heater Switch Test/Replacement

1. Remove the center console panel Center Console Removal/Installationand the audio pocket.

2. Disconnect the 6P (or 7P*) connector from the seat heater switch (A), then remove the switch.

*: Front passenger's






3. Check for continuity between the terminals in each switch position according to the table.





4. If the continuity is not as specified, replace the switch.