Rear Seat Side Bolster Cover Replacement

Rear Seat Side Bolster Cover Replacement

NOTE: Take care not to tear or damage the seat covers.

1. Remove the seat side bolster.

2. Remove the screws (A).

3. Pull out the seat belt guide (B) to detach the clip (C), and remove the rear back side plate (D).






4. Release the all the hook strips (A), and fold back the seat side bolster cover (B), and release the cover from the hooks (C).





5. Install the cover in the reverse order of removal. To prevent wrinkles when installing a side bolster cover, make sure the material is stretched evenly over the pad before securing the hook strips and the staples.