BSI Cover Replacement

BSI Cover Replacement

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the body.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Remove the rear bumper Service and Repair.

2. Remove the BSI cover (A).

1. Left side: Release the harness holder (B).

2. Detach the clip and remove the nut.





3. Install the cover in the reverse order of removal, and note these items:

- If the clip is damaged or stress-whitened, replace it with a new one.
- Push the clip into place securely.