LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2010 >> ZDX V6-3.7L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Relays and Modules - Accessories and Optional Equipment >> Blind Spot Module >> Service and Repair >> BSI Control Unit Removal/Installation

BSI Control Unit Removal/Installation




BSI Control Unit Removal/Installation

1. Remove the driver's side kick panel Service and Repair.

2. Remove the screws from the kick panel (A), then remove the BSI control unit (B).





3. Install the BSI control unit in the reverse order of removal.

scientia non olet · About LEMON Manuals