A/T Idler Gear Shaft Bearing Replacement

A/T Idler Gear Shaft Bearing Replacement

Special Tools Required

- Adjustable bearing puller, 25-40 mm 07736-A01000B
- Driver handle, 15 x 135L 07749-0010000
- Attachment, 52 x 55 mm 07746-0010400
1. Remove the idler gear shaft bearing (A) from the end cover (B) using the 25-40 mm adjustable bearing puller and a commercially available 3/8''-16 slide hammer (C).






2. Install a new bearing in the end cover using the driver handle and the 52 x 55 mm attachment.