LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2010 >> TSX L4-2.4L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Shafts and Clutches >> Secondary Shaft Idler Gear Removal and Installation

Secondary Shaft Idler Gear Removal and Installation




Secondary Shaft Idler Gear Removal and Installation

Special Tools Required

- Attachment, 42 mm I.D. 07QAD-P0A0100

Removal

Place a spacer (A) on the secondary shaft (B), and set a puller (C) under the idler gear (D), then remove the idler gear.






Installation

Install the idler gear (A) in the direction shown on the secondary shaft (B) using the 42 mm I.D. attachment and a press.





scientia non olet · About LEMON Manuals