Rear Wheelhouse Gusset Replacement

Rear Wheelhouse Gusset Replacement

NOTE:

- Put on gloves to protect your hands.

- Take care not to scratch the body or the related parts.

1. Remove these items:
- Rear seat-back Rear Seat Removal/Installation

- Rear seat side bolster Rear Seat Removal/Installation

- Rear wheelhouse insulator Interior Trim Removal/Installation - Trunk Area

2. Detach the wire harness clips (A), and remove the mounting bolts (B), then remove the rear wheelhouse gusset (C).

3. Install the gusset in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips into place securely.