TPMS System

TPMS DTC Troubleshooting: 91, 93, 95, 97

DTC 91, 93, 95, 97: Tire Pressure Sensor Internal Error

1. Turn the ignition switch to ON (II).

2. Clear the DTC with the HDS.

3. Turn the ignition switch to LOCK (0), then turn the ignition switch to ON (II) again.

4. Wait about 1 minute.

5. Check for DTCs with the HDS.
NOTE: The tire pressure sensor of the appropriate wheel is shown.





Is DTC 91, 93, 95, or 97 indicated?
YES - Replace the appropriate tire pressure sensor. Service and Repair

NO - The system is OK at this time.