Manufacturer Code Charts: 2609

Navigation System DTC Troubleshooting: 2609

DTC 2609: VRAM Diag

NOTE:

- Check the vehicle battery condition first. Testing and Inspection

- Before you troubleshoot, make sure to follow the general troubleshooting information. Reading and Clearing Diagnostic Trouble Codes

1. Clear the hard error code. Reading and Clearing Diagnostic Trouble Codes

2. Turn the ignition switch to LOCK (0), and then back to ON (II).

3. Go into the Diagnostic Menu, and select the Self-Diagnosis Mode in the Select Diagnosis items menu. Navigation System Diagnostic Mode

4. Select the System Links, then select the ECU Info.

Is V-RAM OK indicated?
YES - Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the DTC, replace the navigation unit. Service and Repair

NO - Replace the navigation unit. Service and Repair