B11A2

DTC Troubleshooting: B11A2

DTC B11A2: Passenger's MICU (EEPROM) Error

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A. Troubleshooting - B-CAN System Diagnosis Test Mode A

1. Clear the DTCs with the HDS.

2. Turn the ignition switch to LOCK (0) and then back to ON (II).

3. Wait for at least 6 seconds.

4. Check for DTCs with the HDS.

Is DTC B11A2 indicated?
YES - Faulty passenger's MICU; replace the passenger's under-dash fuse/relay box. Passenger's Under-Dash Fuse/Relay Box (MICU) Removal/Installation

NO - Intermittent failure, the system is OK at this time.