Front Turn Signal/Parking Light Replacement

Front Turn Signal/Parking Light Replacement

Replacement

1. Remove the splash shield Front Splash Shield Replacement.

2. Remove the bolt(s) (A), then pull the front turn signal light (B) from the front bumper.









3. Install in the reverse order of removal.

Bulb Replacement

1. Remove the inner fender Front Inner Fender Replacement.

2. Disconnect the 3P connector (A) from the front turn signal light (B).









3. Turn the bulb socket (C) 45 ° counter clockwise to remove it from the housing.

4. Install a new bulb in the reverse order of removal.