Low Fuel Lamp/Indicator: Testing and Inspection

Low Fuel Indicator Test

1. Do the gauge self-diagnostic function Initial Inspection and Diagnostic Overview.

- If the low fuel indicator flashes, go to step 2.
- If the low fuel indicator does not flash, replace the gauge control module Service and Repair.

2. Check for body electrical system DTCs.

- If any DTCs are indicated, do the indicated DTC's troubleshooting.
- If no DTCs are indicated, go to step 3.

3. Do the fuel gauge sending unit test; without SH-AWD Testing and Inspection, with SH-AWD Testing and Inspection (With SH-AWD system: and secondary fuel gauge sending unit test ).