Symptom Troubleshooting

Audio System Symptom Troubleshooting - Audio disc does not eject (without navigation)

Audio disc does not eject (without navigation)

NOTE:

- Check the vehicle battery condition first Testing and Inspection.
- Disc labels should not be used in the audio unit. They may jam and damage the player mechanism.
- Check the connectors for poor connections or loose terminals

1. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.

2. Turn on the audio unit.

Does the system turn on?

YES -

Go to step 3.

NO -

Go to Audio unit power switch will not turn on Audio Unit Power Switch Will Not Turn ON (No Information Display and No Sound) (Without Navigation).�

3. Check to see if the disc ejects correctly with no binding when you push the EJECT button.

Does the disc eject properly?

YES -

Operation is normal.�

NO -

Substitute a known-good audio unit Audio Unit Removal/Installation (Without Navigation). If the symptom/indication goes away, replace the audio unit.�