Center Console Rear Trim Removal/Installation

Special Tools Required

KTC trim tool set SOJATP2014 *

* Available through the Acura Tool and Equipment Program, call 888-424-6857

NOTE:

Take care not to scratch the center console or related parts
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components

Gently pull out the center console rear trim (A) to detach the clips, then remove the trim

Fig 1: Identifying Center Console Rear Trim
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the trim in the reverse order of removal, and note these items
- If the clips are damaged or stress-whitened, replace them with new ones
- Push the clips into place securely