A/T Housing Park Lever Shaft Bearing Replacement

Transmission Housing Park Lever Shaft Bearing Replacement

Special Tools Required

- Bearing remover shaft, 10 mm 07936-GE00100
- Bearing remover head, 10 mm 07936-GE00200
- Sliding hammer weight 07741-0010201
- Driver 07749-0010000
- Attachment, 22 x 24 mm 07746-0010800
1. Remove the park lever shaft bearing from the transmission housing using the bearing remover head (10 mm), the bearing remover shaft (10 mm), and the sliding hammer weight.






2. Install the new bearing until it bottoms in the transmission housing using the driver and the attachment (22 x 24 mm).